This robust brass stock sheet provides a superior raw material solution for a wide array of industrial fabrication needs. Its precise dimensions and inherent material properties ensure reliability and performance in critical applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.866" |
| Length | 29" |
| Width | 32" |
A high-performance industrial component, this brass stock sheet (0.866" thickness, 29" length, 32" width) is engineered for demanding applications. Composed of a copper-zinc alloy, it exhibits excellent machinability, good corrosion resistance, and superior electrical conductivity, making it ideal for manufacturing high-precision parts, electrical connectors, and decorative architectural elements. Its substantial thickness ensures structural integrity for robust end-use components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material specifications against project requirements. 2. Ensure proper cutting and shaping tools are calibrated for 0.866" brass. 3. Implement appropriate joining or fastening techniques based on the application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to material deformation or poor edge quality. | Utilize sharp, appropriate metal-cutting blades designed for brass to ensure clean, precise cuts. |
| Neglecting to consider thermal expansion during fabrication or assembly. | Account for brass's thermal expansion coefficient in designs to prevent stress or failure at temperature extremes. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Precision Machined Parts, Electrical Connectors and Terminals, Decorative Architectural Elements, Heat Exchanger Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||