This premium brass stock sheet is engineered for demanding lubricating applications. Its substantial thickness and precise dimensions ensure exceptional performance and longevity in critical industrial environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.848" |
| Length | 33" |
| Width | 34" |
Specified by design engineers worldwide, this brass stock sheet offers a precise thickness of 0.848 inches, a length of 33 inches, and a width of 34 inches. Composed of high-grade brass known for its inherent lubricity and corrosion resistance, this material is ideal for wear surfaces, bushings, and other components requiring low friction and extended service life. Its machinability allows for precise custom fabrication, meeting stringent engineering tolerances.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Precisely cut the brass sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the brass sheet to the designated area using suitable industrial adhesives or mechanical fasteners, ensuring flush contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cleaning of the mounting surface before installation. | Thoroughly clean and degrease the mounting surface to ensure optimal adhesion and prevent premature failure. |
| Using dull cutting tools, resulting in rough edges and dimensional inaccuracies. | Employ sharp, industrial-grade cutting tools specifically designed for brass to achieve clean cuts and precise dimensions. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces in high-load machinery, Wear plates for sliding mechanisms, Bushings and sleeve bearings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||