This high-grade brass stock sheet is engineered for demanding lubricating applications. Its precise dimensions and inherent material properties ensure reliable performance and extended service life in critical machinery.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.783" |
| Length | 13" |
| Width | 14" |
A proven choice for industrial professionals, this brass stock sheet boasts a thickness of 0.783 inches, a length of 13 inches, and a width of 14 inches. Fabricated from a high-quality brass alloy, it offers exceptional lubricity, good machinability, and inherent corrosion resistance, making it ideal for components subjected to friction and wear. Its dimensional stability and uniform composition ensure consistent performance in bearing surfaces, bushings, and other sliding mechanisms within industrial equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface area is clean and free from debris. 2. Carefully position the brass stock sheet according to design specifications. 3. Secure the sheet using appropriate fastening methods, ensuring no undue stress is applied.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools which can lead to burring or deformation of the brass. | Utilize sharp, high-speed steel or carbide cutting tools specifically designed for brass to ensure clean cuts and maintain dimensional integrity. |
| Over-tightening fasteners, causing stress concentrations and potential cracking. | Employ appropriate torque settings for all fasteners, and consider the use of washers to distribute pressure evenly across the surface. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces, Bushings and sleeve bearings, Wear plates and guides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||