This robust brass stock sheet is engineered for superior performance in lubricating applications. Its precise dimensions and material properties ensure reliable operation and extended service life in critical industrial settings.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.778" |
| Length | 22" |
| Width | 32" |
Designed for demanding industrial environments, this brass stock sheet boasts a precise thickness of 0.778 inches, a length of 22 inches, and a width of 32 inches. Fabricated from high-grade brass, it exhibits excellent machinability, inherent lubricity, and superior corrosion resistance, making it ideal for wear components, bearing surfaces, and sliding elements. Its consistent material composition ensures predictable performance and compatibility with various lubricants, contributing to reduced friction and enhanced operational efficiency in high-stress machinery and equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free of contaminants. 2. Carefully position the brass stock sheet according to design specifications. 3. Secure the sheet using appropriate fasteners or adhesives, ensuring even distribution of load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass in high-wear lubricating applications. | Always specify lubricating grade brass for applications requiring reduced friction and improved wear resistance. |
| Improper surface preparation leading to premature wear. | Thoroughly clean and deburr all mating surfaces before installation to ensure optimal contact and performance. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings, Wear plates and slides, Bushings and sleeve bearings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||