This premium brass stock sheet, precisely manufactured to 0.759" thickness, 25" length, and 27" width, is engineered for demanding abrading and polishing tasks. Its superior material properties ensure consistent performance and longevity.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.759" |
| Length | 25" |
| Width | 27" |
Manufactured under strict quality controls, this brass stock sheet exhibits exceptional formability and workability, crucial for precision abrading and polishing operations. The 0.759" thickness provides robust structural integrity for various industrial and artisanal applications. Brass's inherent corrosion resistance and moderate hardness make it an ideal substrate and abrasive medium, offering a balance of durability and controlled material removal. Tolerances are maintained within industry-standard deviations to ensure repeatable results and seamless integration into fabrication processes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the brass sheet is clean and free of any contaminants. 2. Position the sheet securely on a stable work surface. 3. Begin abrading or polishing procedures according to material requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during initial contact, leading to uneven material removal. | Apply gradual pressure, allowing the abrasive action to work progressively for a uniform finish. |
| Failing to clean the work surface and brass sheet between passes, causing scratching. | Thoroughly clean both the work surface and the brass sheet after each abrasive cycle to prevent embedment of debris. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Precision surface finishing of metals, Decorative metalwork and inlay, Jewelry fabrication and repair.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||