This industrial-grade brass stock sheet offers exceptional durability and accuracy. Its precise dimensions make it ideal for critical measuring and inspecting tasks in demanding environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.705" |
| Length | 31" |
| Width | 33" |
Precision-manufactured to tight tolerances, this brass stock sheet is engineered for superior performance in critical applications. Measuring 0.705 inches thick, 31 inches in length, and 33 inches in width, it offers substantial material for fabrication. The inherent properties of brass, including excellent machinability, corrosion resistance, and good electrical conductivity, make this sheet suitable for a wide range of industrial uses where dimensional stability and longevity are paramount. Its consistent quality ensures reliable results for prototyping, fixture creation, and precision tooling.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any surface defects or damage upon receipt. 2. Clean surface thoroughly to remove any oils or debris before fabrication. 3. Fabricate according to design specifications using appropriate cutting, machining, or forming techniques.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard mild steel cutting tools on brass without proper adjustments. | Utilize carbide-tipped or high-speed steel tooling specifically designed for non-ferrous metals to prevent excessive heat buildup and tool wear. |
| Ignoring the potential for galvanic corrosion when in contact with dissimilar metals in a corrosive environment. | Isolate brass from other metals using non-conductive gaskets or coatings if the application is prone to galvanic corrosion. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Precision measuring fixtures, Inspection gauges and templates, Electrical component bases, Corrosion-resistant fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||