This high-density brass stock sheet is specifically engineered for demanding lubricating applications. Its superior self-lubricating properties ensure reduced friction and extended component life in critical machinery.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.688" |
| Length | 32" |
| Width | 21" |
Engineered for reliability and performance, this brass stock sheet boasts a substantial thickness of 0.688 inches, a generous length of 32 inches, and a width of 21 inches. Formulated for optimal lubricity, this alloy exhibits excellent machinability and a low coefficient of friction, making it ideal for applications requiring consistent, low-wear operation. Its inherent corrosion resistance further enhances durability in diverse industrial environments, ensuring sustained performance under load.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean, smooth, and free of contaminants. 2. Carefully cut the brass stock sheet to the required dimensions using appropriate machining tools. 3. Securely fasten the fabricated component to the intended assembly, ensuring proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass instead of a lubricating grade | Specify and procure brass stock sheet explicitly designated for lubricating applications to achieve the desired low-friction properties. |
| Inadequate surface preparation of mating components | Thoroughly clean and deburr all mating surfaces to prevent premature wear and ensure optimal contact. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces, Bushings, Wear plates, Slide guides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||