This robust brass stock sheet provides exceptional strength and corrosion resistance, making it ideal for critical suspending and bracing applications where durability is paramount. Precisely manufactured for demanding environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.680" |
| Length | 32" |
| Width | 22" |
Engineered for reliability and performance, this brass stock sheet boasts a substantial 0.680-inch thickness, ensuring superior load-bearing capacity and structural integrity. Composed of high-quality brass, it exhibits excellent resistance to corrosion and environmental degradation, crucial for long-term stability in suspending and bracing systems. The 32-inch length and 22-inch width offer ample material for fabricating custom supports, brackets, and structural components in demanding industrial, marine, and architectural applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Accurately mark and drill pilot holes according to the intended load and fastening method. 3. Securely fasten the brass stock sheet using appropriate, corrosion-resistant hardware, ensuring even distribution of load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners for the sheet thickness and load. | Utilize fasteners with a diameter and length sufficient to engage properly with the 0.680" thick brass and the substrate, rated for the expected load. |
| Inadequate surface preparation leading to poor adhesion or galvanic corrosion. | Thoroughly clean and degrease both the brass sheet and the mounting surface. If dissimilar metals are involved, consider using insulating compounds or washers. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heavy-duty structural bracing, Marine suspension systems, Custom industrial support fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||