This premium brass stock sheet offers superior durability and non-sparking properties essential for critical safety applications. Its robust composition ensures reliability in demanding environments, meeting stringent industrial standards.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.644" |
| Length | 16" |
| Width | 47" |
Precision-manufactured to tight tolerances, this brass stock sheet boasts a thickness of 0.644 inches, a width of 47 inches, and a length of 16 inches. Composed of a specific brass alloy, it exhibits excellent corrosion resistance and non-magnetic properties, crucial for environments where electrical conductivity or magnetic interference is a concern. Its inherent strength and formability make it suitable for fabrication into safety guards, electrical enclosures, and non-sparking tooling, ensuring operational integrity and personnel protection.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of debris. 2. Carefully position the brass stock sheet according to the design specifications. 3. Secure the sheet using appropriate fasteners and mounting hardware, ensuring a stable and robust connection.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners that may corrode or spark. | Utilize corrosion-resistant fasteners, such as stainless steel or brass, compatible with the intended environment and application. |
| Inadequate support leading to potential structural failure. | Ensure the mounting structure provides sufficient load-bearing capacity and is designed to withstand anticipated stresses and vibrations. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Non-sparking safety guards, Electrical component housings in hazardous areas, Corrosion-resistant structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||