This premium brass stock sheet, measuring 0.643" thick, 13" wide, and 36" long, offers exceptional electrical conductivity and corrosion resistance. Ideal for demanding electrical and lighting components.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.643" |
| Length | 13" |
| Width | 36" |
Manufactured under strict quality controls, this brass stock sheet boasts a nominal thickness of 0.643 inches, a width of 36 inches, and a length of 13 inches. Composed of a copper-zinc alloy, it exhibits excellent electrical conductivity, good corrosion resistance, and high tensile strength, making it suitable for high-current applications. The material's inherent machinability allows for precise fabrication of intricate electrical components, terminals, and connectors where reliability and performance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surface is clean and free of contaminants. 2. Precisely cut the brass sheet to the required dimensions using appropriate tooling. 3. Secure the fabricated component using approved fasteners or welding techniques as per design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fasteners that can cause galvanic corrosion. | Utilize fasteners made of brass, bronze, or stainless steel to maintain material compatibility. |
| Overheating during soldering or welding, leading to material degradation. | Employ appropriate temperature controls and techniques to prevent annealing or structural damage. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Electrical Connectors and Terminals, Busbars and Conductors, Lighting Fixture Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||