This high-quality brass stock sheet, engineered for lubrication, offers exceptional wear resistance and low friction. Its robust composition ensures reliable performance in demanding mechanical environments, making it ideal for critical components.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.637" |
| Length | 15" |
| Width | 25" |
Specified by design engineers worldwide, this brass stock sheet is manufactured to exacting standards for lubricating applications. Measuring 0.637 inches in thickness, 15 inches in length, and 25 inches in width, it exhibits excellent machinability and inherent self-lubricating properties due to its copper-tin alloy composition. This material is chosen for its ability to reduce friction and wear in sliding mechanisms, bearings, and bushings, particularly where standard lubrication may be insufficient or impractical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free from debris. 2. Accurately cut the brass stock sheet to the required dimensions using appropriate tooling. 3. Securely fasten the cut brass component into its intended assembly, ensuring proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys where specific lubricating properties are required. | Always select brass alloys specifically designated for lubricating applications, ensuring the correct copper-tin composition for optimal performance. |
| Improper surface preparation of mating components. | Thoroughly clean and de-burr both the brass component and its mating surfaces to prevent premature wear and ensure smooth operation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings, Wear plates in sliding mechanisms, Bushings for low-friction pivots.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||