This high-performance brass stock sheet, specifically formulated for lubricating applications, offers superior machinability and inherent self-lubricating properties. Designed for components requiring minimal friction and exceptional wear resistance.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.632" |
| Length | 17" |
| Width | 25" |
Built to exacting engineering tolerances, this 0.632-inch thick brass stock sheet (17" x 25") is manufactured from a proprietary alloy optimized for low friction coefficients and excellent bearing characteristics. Its ductility and corrosion resistance ensure long service life in dynamic systems. This material is ideal for producing bushings, bearings, wear plates, and other components subjected to sliding contact and requiring reliable lubrication under load.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean and free of debris. 2. Precisely machine the brass stock sheet to the required dimensions. 3. Install the component, ensuring proper alignment and clearance for operation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys for high-friction applications. | Utilize this specialized lubricating grade brass for components requiring reduced wear and friction. |
| Improper machining tolerances leading to binding or premature wear. | Adhere strictly to specified machining tolerances for optimal performance. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings, Wear strips and guides, Bushings for rotating shafts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||