This high-performance brass stock sheet, specifically formulated for lubricating applications, offers superior wear resistance and a low coefficient of friction. Its robust construction ensures reliable performance under heavy loads and continuous operation.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.617" |
| Length | 17" |
| Width | 21" |
Designed for demanding industrial environments, this brass stock sheet features precise dimensions of 0.617 inches in thickness, 17 inches in length, and 21 inches in width. Crafted from a specialized brass alloy, it exhibits excellent machinability and inherent self-lubricating properties, minimizing wear and extending component lifespan. This makes it an optimal choice for applications requiring reduced friction, such as bushings, bearings, wear pads, and sliding components in machinery and equipment subjected to continuous motion and high stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean, flat, and free of debris. 2. Carefully position the brass stock sheet to the desired location, aligning with pre-drilled holes or mounting points. 3. Secure the sheet using appropriate fasteners (e.g., bolts, rivets), ensuring even pressure distribution to prevent warping or damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to uneven wear. | Thoroughly clean and flatten the mating surface before installation to ensure optimal contact and lubrication. |
| Over-tightening fasteners, causing deformation of the brass sheet. | Apply fasteners with moderate torque, ensuring even pressure across the sheet to avoid compromising its structural integrity. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Low-friction bearings and bushings, Wear plates and sliding components, Self-lubricating machine parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||