This high-performance lubricating brass stock sheet offers superior wear resistance and self-lubricating properties. Precisely manufactured to industry standards, it's ideal for demanding applications where friction reduction is critical.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.612" |
| Length | 28" |
| Width | 14" |
Manufactured under strict quality controls, this brass stock sheet is engineered for optimal performance in lubricating applications. Its substantial 0.612" thickness, combined with a 14" width and 28" length, provides ample material for fabrication. The brass alloy is specifically chosen for its inherent lubricity and excellent machinability, ensuring smooth operation and extended service life in components subjected to high loads and sliding friction, such as bearings, bushings, and wear plates.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mating surfaces thoroughly to remove any contaminants. 2. Precisely machine the brass stock sheet to the required dimensions for the component. 3. Install the fabricated component, ensuring proper alignment and lubrication if required by the application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys for high-wear applications. | Always select a brass alloy specifically designated for lubricating or bearing applications to ensure adequate wear resistance and self-lubricating properties. |
| Inadequate surface preparation before installation. | Thoroughly clean both the brass component and the mating surfaces to prevent premature wear and ensure optimal performance. |
A: This Brass Stock Sheet is manufactured from Brass.
A: High-performance bearings and bushings, Wear plates and sliding components, Self-lubricating machine elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||