This premium brass stock sheet offers exceptional self-lubricating properties, engineered for demanding industrial applications requiring reduced friction and wear. Its robust composition ensures longevity and reliable performance under challenging conditions.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.570" |
| Length | 43" |
| Width | 48" |
A proven choice for industrial professionals, this lubricating grade brass stock sheet boasts a precise thickness of 0.570 inches, with generous dimensions of 43 inches in length and 48 inches in width. The material's inherent low coefficient of friction, attributed to its specific alloy composition, makes it ideally suited for components subjected to continuous movement and high load bearing. This makes it an excellent candidate for bushings, bearings, wear plates, and sliding mechanisms where traditional lubrication may be impractical or prone to failure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Precisely cut the brass stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the fabricated component to the substrate using suitable mechanical fasteners or adhesives, ensuring proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using general-purpose brass for high-wear applications. | Always specify lubricating grade brass for components requiring self-lubricating properties to prevent premature wear and seizure. |
| Improper surface preparation before installation. | Thoroughly clean both the brass component and its mating surface to eliminate contaminants that can impede smooth operation and cause damage. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bushings and bearings, Wear plates and guides in automated machinery, Sliding components in conveyor systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||