This robust brass stock sheet is engineered for precision in demanding industrial measurement and inspection applications. Its substantial thickness and large surface area provide a stable, reliable platform for critical operations.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.537" |
| Length | 17" |
| Width | 31" |
A high-performance industrial component, this brass stock sheet is meticulously manufactured to exacting standards. Featuring a precise thickness of 0.537 inches, a generous length of 17 inches, and a width of 31 inches, it offers a substantial and stable surface. The inherent properties of brass, including excellent machinability, corrosion resistance, and a non-sparking nature, make it ideal for use in environments where accuracy and durability are paramount. This sheet is suitable for use in metrology, calibration, tooling, and as a foundational element in custom gauging fixtures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, flat, and free from debris. 2. Carefully position the brass stock sheet onto the prepared surface, aligning it as required. 3. Secure the sheet using appropriate fasteners (e.g., screws, bolts) at regular intervals to prevent warping or movement.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to deformation of the sheet. | Tighten fasteners to a snug fit, incrementally, and avoid excessive torque. |
| Using abrasive cleaning agents that can scratch the surface. | Clean with mild soap and water, or a non-abrasive brass cleaner. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Precision Measuring Platforms, Calibration Standards, Custom Fixturing Substrates, Electrical Grounding Plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||