This premium brass stock sheet is engineered for the rigors of pneumatic systems. Its substantial dimensions and superior brass composition ensure exceptional performance and longevity in critical applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.536" |
| Length | 31" |
| Width | 47" |
Manufactured under strict quality controls, this brass stock sheet exhibits a precise thickness of 0.536 inches, a substantial length of 31 inches, and a width of 47 inches. The high-grade brass alloy provides excellent machinability, corrosion resistance, and conductivity, making it an optimal choice for fabricating custom pneumatic components. Its robust nature ensures durability against pressure fluctuations and environmental factors inherent in pneumatic operations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the required dimensions on the brass stock sheet. 2. Utilize appropriate cutting tools (e.g., abrasive saw, laser cutter) to achieve precise shapes. 3. Deburr all cut edges thoroughly to prevent potential damage to downstream pneumatic components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull cutting tools, leading to rough edges and potential material deformation. | Employ sharp, high-quality cutting blades or bits designed for brass to ensure clean cuts and a smooth finish. |
| Failing to account for material expansion/contraction due to temperature changes during operation. | Incorporate appropriate allowances in component design for thermal expansion and contraction, especially in systems with significant temperature variations. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom pneumatic manifold fabrication, Pneumatic valve component machining, Pressure vessel construction for low-pressure pneumatic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||