This high-quality brass stock sheet is engineered for superior performance in demanding lubricating applications. Its inherent properties ensure smooth operation and reduced friction in critical industrial machinery.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.534" |
| Length | 46" |
| Width | 29" |
Purpose-built for heavy-duty applications, this brass stock sheet offers exceptional wear resistance and a naturally low coefficient of friction, making it ideal for components in sliding or rotating mechanisms. Manufactured to precise tolerances, it measures 0.534 inches thick, 46 inches in length, and 29 inches in width. The specific alloy composition of this brass provides excellent machinability for custom component fabrication and ensures long service life under continuous operational stress. Its non-galling characteristics further enhance its utility in lubrication-critical scenarios.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mating surfaces thoroughly to remove any contaminants. 2. Precisely machine the brass sheet to the required component dimensions. 3. Install the fabricated brass component, ensuring proper alignment and secure fastening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys for high-friction applications. | Select lubricating grade brass specifically engineered for low friction and wear resistance. |
| Inadequate surface preparation of mating components. | Always ensure both the brass component and its mating surface are meticulously cleaned before installation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing Surfaces, Bushings, Wear Plates, Low-Friction Slides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||