This substantial brass stock sheet is engineered for demanding pneumatic system fabrication. Its robust dimensions and superior material properties ensure reliability and longevity in critical industrial environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.526" |
| Length | 16" |
| Width | 44" |
A high-performance industrial component, this brass stock sheet boasts a precise thickness of 0.526 inches, a generous length of 16 inches, and a width of 44 inches. Crafted from high-grade brass, it offers exceptional machinability, excellent corrosion resistance against various fluids and gases commonly found in pneumatic systems, and superior durability. This material composition makes it ideal for fabricating custom fittings, manifold blocks, valve bodies, and other essential components where precise tolerances and robust performance are paramount. Its thermal conductivity is also a beneficial characteristic in certain controlled environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the desired component dimensions on the brass stock sheet. 2. Utilize appropriate cutting tools (e.g., band saw, CNC router) for precise material removal. 3. Employ machining techniques (e.g., milling, drilling, turning) to achieve final component geometry and tolerances. 4. Deburr all edges thoroughly to prevent potential damage to pneumatic seals or downstream components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to material deformation or poor edge quality. | Always use sharp, high-quality cutting tools specifically designed for brass to ensure clean cuts and preserve material integrity. |
| Insufficient deburring of machined edges, potentially causing leaks or seal damage. | Thoroughly deburr all cut and machined edges using a deburring tool or fine-grit sandpaper to ensure a smooth, safe finish. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom Pneumatic Manifold Fabrication, High-Pressure Pneumatic Fittings, Industrial Valve Body Machining.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||