This high-performance Brass Stock Sheet is engineered for demanding lubricating applications. Its inherent properties ensure excellent wear resistance and low friction, making it ideal for components subjected to constant movement and load.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.525" |
| Length | 36" |
| Width | 15" |
A proven choice for industrial professionals, this Brass Stock Sheet boasts a precise thickness of 0.525 inches, a substantial length of 36 inches, and a width of 15 inches. Composed of a lubricating-grade brass alloy, it exhibits superior self-lubricating properties, excellent machinability, and robust corrosion resistance. This material is specifically formulated to reduce friction and wear in dynamic systems, ensuring extended service life for critical components. Its dimensional stability and consistent material properties make it reliable for precision engineering and manufacturing processes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mating surfaces thoroughly to remove any debris or contaminants. 2. Ensure proper alignment of the brass stock sheet with the intended component or assembly. 3. Secure the sheet using appropriate mechanical fasteners or adhesives, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass instead of a lubricating grade for high-friction applications. | Always select a lubricating-grade brass specifically designed for low friction and wear reduction. |
| Insufficient surface preparation before installation, leading to premature wear. | Thoroughly clean and deburr all mating surfaces before installing the brass stock sheet. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces and bushings, Sliding components in machinery, Wear plates and friction pads.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||