This premium brass stock sheet offers exceptional strength and corrosion resistance, engineered for critical suspending and bracing applications. Its robust dimensions and superior material composition ensure reliable structural support in diverse environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.524" |
| Length | 48" |
| Width | 40" |
Precision-manufactured to tight tolerances, this brass stock sheet boasts a substantial 0.524-inch thickness, ensuring significant load-bearing capacity for demanding structural applications. Measuring 48 inches in length and 40 inches in width, it provides ample coverage for bracing frameworks and suspension systems. The intrinsic properties of brass, including its excellent corrosion resistance, inherent ductility, and high tensile strength, make it an ideal material for environments exposed to moisture or chemical agents, guaranteeing longevity and performance in architectural, industrial, and marine settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and structurally sound. 2. Accurately mark and pre-drill mounting holes according to the design specifications. 3. Securely fasten the brass sheet using appropriate industrial-grade fasteners, ensuring even distribution of load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners that can lead to sheet deformation or failure. | Always utilize fasteners with a shear strength and diameter sufficient to handle the expected loads and prevent stress concentrations. |
| Inadequate surface preparation leading to poor adhesion or premature corrosion at contact points. | Thoroughly clean and degrease the mounting surface and the brass sheet prior to installation to ensure optimal contact and prevent galvanic corrosion. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Structural bracing for heavy machinery, Architectural support elements in corrosive environments, Custom fabrication for marine and industrial fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||