This premium brass stock sheet, precisely machined to 0.520" thickness, is engineered for demanding abrading and polishing tasks. Its superior material properties ensure consistent performance and exceptional finish quality for critical industrial applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.520" |
| Length | 26" |
| Width | 26" |
Trusted by engineers across multiple sectors, this 0.520" thick brass stock sheet offers a robust solution for abrading and polishing operations. Measuring 26 inches by 26 inches, it's manufactured from high-grade brass known for its excellent workability, corrosion resistance, and non-sparking characteristics. The precise dimensional tolerances and uniform grain structure make it ideal for creating custom abrasive pads, polishing fixtures, and precision component finishing where material integrity and consistent surface preparation are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the brass stock sheet is clean and free of any contaminants. 2. Securely mount the sheet to the designated fixture or substrate using appropriate mechanical fasteners or adhesives. 3. Verify alignment and flatness before proceeding with the abrading or polishing process.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a sheet with uneven thickness for critical polishing applications. | Always inspect the sheet for dimensional consistency before use to ensure uniform abrasion. |
| Exposing the brass to highly corrosive environments without proper surface treatment. | Consider protective coatings or select alternative materials if extreme corrosion resistance is required. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom abrasive pad manufacturing, Precision metal finishing, Polishing fixture fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||