This premium brass stock sheet, engineered for lubricating applications, offers exceptional wear resistance and low friction. Its precise dimensions and material composition ensure optimal performance in demanding environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.507" |
| Length | 40" |
| Width | 38" |
Precision-manufactured to tight tolerances, this 0.507-inch thick brass stock sheet measures 40 inches in length and 38 inches in width. Composed of a high-copper alloy, it exhibits excellent machinability and inherent self-lubricating properties, making it ideal for bearings, bushings, and wear plates. The material's thermal conductivity also aids in heat dissipation, further enhancing its suitability for friction-intensive components. Its robust structure provides superior load-bearing capacity and longevity in dynamic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean, dry, and free of debris. 2. Carefully position the brass stock sheet according to design specifications. 3. Securely fasten the sheet using appropriate mechanical fasteners or adhesives, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to premature wear. | Thoroughly clean and degrease both the brass sheet and the mating surface before installation. |
| Over-tightening fasteners, causing deformation. | Use torque wrenches and follow specified torque values to avoid over-stressing the material. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings, Wear strips and guides, Bushings and sleeves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||