This lubricating grade brass stock sheet offers exceptional self-lubricating properties and low friction. Its robust composition ensures excellent wear resistance, making it ideal for critical components in high-stress environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.489" |
| Length | 21" |
| Width | 14" |
Manufactured under strict quality controls, this brass stock sheet measures 0.489 inches in thickness, 21 inches in length, and 14 inches in width. Engineered with specific alloying elements, it exhibits a balanced combination of machinability, corrosion resistance, and inherent lubricity. This material is optimized for reduced friction and extended service life in dynamic systems. Its controlled microstructure ensures consistent performance and reliability under varying load and temperature conditions, meeting stringent industrial requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mating surfaces thoroughly to remove any contaminants. 2. Precisely cut the brass stock sheet to the required dimensions for the component. 3. Securely fasten the fabricated component using appropriate industrial fasteners and lubrication, if required by the system design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys for high-friction applications. | Always specify lubricating grade brass for components subjected to significant sliding friction to ensure longevity and prevent premature wear. |
| Inadequate surface preparation before installation. | Ensure all mating surfaces are free of debris, oils, or manufacturing residues to achieve optimal performance and prevent galling. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces and bushings, Wear strips and guides, Low-friction sliding components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||