This high-grade brass stock sheet is engineered for demanding industrial safety applications, providing robust corrosion resistance and excellent machinability for custom fabrication.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.486" |
| Length | 33" |
| Width | 47" |
A high-performance industrial component, this brass stock sheet boasts a substantial thickness of 0.486 inches, a generous length of 33 inches, and a width of 47 inches. Crafted from high-purity brass, it exhibits superior tensile strength and ductility, making it ideal for applications requiring both durability and formability. Its inherent non-sparking properties are critical for environments where ignition hazards are a concern, while its excellent corrosion resistance ensures longevity in diverse operational settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is properly supported to prevent bowing during handling. 2. Mark and cut to the required dimensions using appropriate metalworking tools. 3. Securely fasten the fabricated component in its intended safety application, adhering to all relevant structural integrity standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools which can cause excessive heat and damage the brass. | Utilize specialized carbide or high-speed steel cutting tools designed for non-ferrous metals to ensure clean cuts and minimize heat generation. |
| Over-tightening fasteners, which can lead to stress concentrations and potential cracking of the brass. | Employ proper torque specifications for all fasteners and consider using washers to distribute pressure evenly. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Non-sparking safety barriers, Electrical grounding components in hazardous areas, Custom safety signage and equipment plating.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||