This brass stock sheet provides robust, non-sparking material ideal for safety-critical environments. Its excellent corrosion resistance and durability ensure long-term performance in demanding applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.416" |
| Length | 43" |
| Width | 27" |
Precision-manufactured to tight tolerances, this brass stock sheet offers exceptional dimensional stability. The 0.416" thickness, 43" length, and 27" width provide a substantial material for fabrication. Composed of a copper-zinc alloy, it exhibits inherent non-sparking properties, crucial for environments where ignition sources must be eliminated. Its moderate strength and excellent machinability allow for intricate component creation, while its resistance to various chemicals and saltwater makes it suitable for a wide range of industrial and marine safety installations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surface is clean and free of debris. 2. Accurately measure and cut the brass sheet to the required dimensions using appropriate cutting tools. 3. Secure the brass sheet using approved fastening methods for the specific application, ensuring a stable installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not rated for brass, leading to poor edge quality. | Utilize carbide-tipped or diamond-edged cutting tools specifically designed for non-ferrous metals like brass for clean, precise cuts. |
| Inadequate surface preparation before installation, compromising adhesion or structural integrity. | Thoroughly clean and degrease the installation surface and the brass sheet to ensure optimal contact and prevent contamination. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Non-sparking tool fabrication, Electrical grounding components, Marine hardware in hazardous zones.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||