This high-performance brass stock sheet is precisely engineered for lubricating applications. Its superior material properties minimize friction and wear, ensuring extended component life in critical heavy-duty systems.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.380" |
| Length | 36" |
| Width | 19" |
Purpose-built for heavy-duty applications, this lubricating grade brass stock sheet offers exceptional wear resistance and a low coefficient of friction. With precise dimensions of 0.380" thickness, 36" length, and 19" width, it is ideal for fabricating critical components in machinery and equipment where smooth operation and reduced heat generation are paramount. The inherent properties of brass, particularly its ability to self-lubricate under certain conditions, make it a superior choice for bearings, bushings, and sliding mechanisms in high-load, continuous-duty scenarios.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean all mating surfaces thoroughly to remove debris and contaminants. 2. Precisely cut the brass stock sheet to the required component dimensions. 3. Securely fasten the fabricated component according to equipment specifications, ensuring proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass instead of a designated lubricating grade. | Always select lubricating grade brass for applications requiring inherent self-lubricating properties to prevent premature wear. |
| Inadequate surface preparation before installation. | Ensure all surfaces are meticulously cleaned and deburred to prevent friction and potential damage during operation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Industrial Bearings, Wear Plates, Bushings, Sliding Mechanisms, Gears.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||