This high-performance brass stock sheet is engineered for superior performance in lubricating applications. Its precise dimensions and material composition ensure optimal friction reduction and extended component life.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.370" |
| Length | 47" |
| Width | 31" |
A high-performance industrial component, this brass stock sheet features a nominal thickness of 0.370 inches, a substantial length of 47 inches, and a width of 31 inches. Formulated for excellent lubricity, the brass alloy exhibits superior self-lubricating properties, making it an ideal choice for applications demanding reduced friction and wear, such as bushings, bearings, and sliding mechanisms. Its dimensional stability and inherent corrosion resistance further enhance its suitability for harsh operational environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean, smooth, and free of debris. 2. Carefully position the brass stock sheet according to design specifications. 3. Secure the sheet using appropriate fastening methods, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to uneven wear. | Thoroughly clean and prepare all mating surfaces before installation. |
| Over-tightening fasteners, causing deformation. | Apply fasteners incrementally and with controlled torque to avoid material distortion. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Wear Strips, Low-Friction Bearings, Self-Lubricating Bushings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||