This high-quality brass stock sheet, engineered to stringent standards, offers superior safety and durability. Its non-sparking properties make it ideal for hazardous environments where ignition is a concern.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.367" |
| Length | 39" |
| Width | 44" |
Manufactured under strict quality controls, this brass stock sheet boasts a thickness of 0.367 inches, a length of 39 inches, and a width of 44 inches. Composed of a copper-zinc alloy, it exhibits excellent corrosion resistance and inherent non-sparking characteristics, crucial for electrical conductivity control and mitigating ignition risks in potentially explosive atmospheres. Its robust mechanical properties ensure longevity and structural integrity in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean, dry, and free from contaminants. 2. Carefully position the brass sheet according to the design specifications. 3. Secure the sheet using appropriate fasteners or bonding methods, ensuring even distribution of stress.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fasteners that could cause galvanic corrosion. | Utilize fasteners made of brass, stainless steel (316 or higher), or other materials recommended for brass to prevent corrosion. |
| Improper cutting or shaping leading to sharp edges or weakened areas. | Employ appropriate cutting tools and techniques designed for brass, and deburr edges thoroughly to ensure a safe and uniform finish. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Non-sparking tools and equipment fabrication, Electrical grounding and bonding components, Hazardous environment cladding and partitions.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||