This robust brass stock sheet offers exceptional durability and corrosion resistance. Ideal for custom fabrication in material handling systems, it provides a reliable and long-lasting solution for demanding industrial environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.358" |
| Length | 17" |
| Width | 30" |
A proven choice for industrial professionals, this brass stock sheet features a precise thickness of 0.358 inches, a length of 17 inches, and a width of 30 inches. Manufactured from high-grade brass alloy, it exhibits superior machinability, excellent electrical conductivity, and inherent resistance to corrosion and tarnishing. Its substantial gauge makes it suitable for load-bearing components, custom chutes, hoppers, and wear plates within material handling equipment where strength and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of debris. 2. Precisely measure and mark cut lines based on design requirements. 3. Utilize appropriate cutting tools (e.g., abrasive saw, shear) with proper safety precautions to achieve desired dimensions.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for brass, leading to poor edge quality and tool damage. | Employ specialized metal cutting blades or saws with appropriate tooth pitch and feed rates for brass to ensure clean cuts and maximize tool life. |
| Neglecting to account for thermal expansion during welding or high-temperature applications. | Allow adequate clearance and consider pre-heating or post-heating procedures if welding brass in close proximity to other materials or in elevated temperature environments. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom fabrication of chutes and hoppers, Wear plates and protective liners for conveyor systems, Durable bases and structural components for material handling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||