This high-quality brass stock sheet, specifically formulated for lubricating applications, offers excellent machinability and inherent self-lubricating properties. Its precise dimensions ensure seamless integration into demanding industrial systems, reducing friction and wear.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.356" |
| Length | 26" |
| Width | 42" |
Built to exacting engineering tolerances, this brass stock sheet possesses a thickness of 0.356 inches, a length of 26 inches, and a width of 42 inches. Composed of a specialized brass alloy optimized for lubricating performance, it exhibits superior wear resistance and a low coefficient of friction. This material is ideal for applications requiring continuous, low-maintenance operation, such as bushings, bearings, and wear plates in machinery where lubrication is critical or difficult to maintain.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, flat, and free of debris. 2. Precisely cut or machine the brass stock sheet to the required dimensions for your application. 3. Securely fasten the fabricated brass component using appropriate hardware, ensuring proper alignment to minimize stress.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass instead of a lubricating grade alloy. | Specify and use brass alloys specifically formulated for their lubricating and wear-resistant properties to achieve optimal performance and longevity. |
| Inadequate surface preparation of mating components. | Thoroughly clean and deburr all mating surfaces to prevent premature wear and ensure smooth operation of the lubricated brass component. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings, Wear strips and guides, Bushings and sleeves in sliding mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||