This high-performance brass stock sheet is engineered for demanding lubricating applications. Its precise dimensions and material composition ensure optimal friction reduction and wear resistance in critical components.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.349" |
| Length | 39" |
| Width | 35" |
Specified by design engineers worldwide, this lubricating brass stock sheet offers superior self-lubricating properties due to its inherent material characteristics. The sheet measures 0.349 inches in thickness, 39 inches in length, and 35 inches in width. This specific brass alloy formulation minimizes friction and wear, making it an indispensable material for bushings, bearings, gears, and other sliding components where a reduced need for external lubrication is paramount. Its excellent machinability allows for intricate part fabrication, ensuring dimensional accuracy and performance consistency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface area for installation is clean and free of debris. 2. Cut the brass stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the fabricated component into its intended assembly, verifying proper fit and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys for lubricating applications. | Always select a brass alloy specifically designated for lubricating or bearing applications to ensure optimal performance and longevity. |
| Inadequate surface preparation before installation. | Thoroughly clean mating surfaces to prevent premature wear or binding. |
A: This Brass Stock Sheet is manufactured from Brass.
A: High-load bushings, Self-lubricating bearings, Wear plates in sliding mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||