This premium brass stock sheet offers exceptional corrosion resistance and tensile strength. Precisely manufactured for critical suspending and bracing applications where reliability is paramount.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.281" |
| Length | 14" |
| Width | 17" |
A high-performance industrial component, this brass stock sheet is engineered to meet rigorous demands. With a substantial thickness of 0.281 inches, it provides superior load-bearing capacity. The dimensions of 14 inches by 17 inches offer versatility for fabrication and installation. Crafted from high-grade brass, it exhibits excellent ductility, machinability, and resistance to environmental degradation, making it suitable for a wide array of industrial applications including structural support and protective shielding in corrosive or high-humidity environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Accurately mark and drill mounting holes according to design specifications. 3. Securely fasten the brass sheet using appropriate industrial-grade hardware, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners that do not adequately support the sheet's weight. | Select fasteners with a diameter and strength rating sufficient to bear the intended load, considering potential vibration or dynamic forces. |
| Over-tightening fasteners, leading to stress concentrations and potential cracking of the brass. | Tighten fasteners to the manufacturer's recommended torque specifications to avoid material deformation and ensure structural integrity. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Structural bracing in corrosive environments, Support components for heavy machinery, Custom fabricated mounting plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||