This premium brass stock sheet, measuring 0.253 inches thick by 27 inches wide and 34 inches long, offers exceptional strength and corrosion resistance for critical suspending and bracing applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.253" |
| Length | 27" |
| Width | 34" |
Engineered for reliability and performance, this brass stock sheet boasts a substantial thickness of 0.253 inches, providing superior load-bearing capacity. The 27-inch width and 34-inch length offer ample surface area for fabrication and integration into complex systems. Crafted from high-grade brass, it exhibits excellent tensile strength, inherent corrosion resistance against a wide range of chemicals and environmental factors, and good machinability. This material is ideally suited for structural bracing, support elements in corrosive environments, and custom fabricated components requiring robust and enduring performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the sheet for required dimensions. 2. Utilize appropriate cutting tools (e.g., abrasive saws, plasma cutters) suitable for brass. 3. Fabricate components using standard metalworking techniques, ensuring all connections are structurally sound.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to material deformation or poor edge quality. | Employ tools specifically designed for cutting brass to ensure clean, precise edges and maintain material integrity. |
| Inadequate consideration of load bearing requirements, resulting in insufficient support. | Perform thorough structural analysis to confirm the brass sheet's capacity meets or exceeds the anticipated load stresses for the intended application. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Industrial support structures, Custom bracing for heavy equipment, Corrosion-resistant marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||