This premium brass stock sheet, specifically engineered for lubricating applications, offers superior machinability and inherent self-lubricating properties. Its dense, fine-grained structure ensures exceptional wear resistance and smooth operation in demanding environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.238" |
| Length | 25" |
| Width | 23" |
Specified by design engineers worldwide, this brass stock sheet is manufactured to exacting tolerances, featuring a thickness of 0.238 inches, a length of 25 inches, and a width of 23 inches. Composed of a high-copper alloy, it exhibits excellent machinability, good corrosion resistance, and desirable frictional characteristics ideal for plain bearings, bushings, and wear plates. The material's inherent lubricity minimizes friction and wear, extending component lifespan in dynamic systems. Its thermal conductivity also aids in heat dissipation within lubricated assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean, smooth, and free of debris. 2. Precisely cut the brass stock sheet to the required dimensions for the specific application. 3. Securely fasten the fabricated component using appropriate fasteners or adhesive, ensuring proper alignment with mating parts.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation of mating components. | Thoroughly clean and deburr all mating surfaces to prevent premature wear and ensure smooth operation. |
| Improperly sized or fitted components. | Verify all dimensions and tolerances against design specifications before machining and installation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Plain bearings and bushings, Wear plates and sliding surfaces, Gears and sprockets in low-load applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||