This premium Brass Stock Sheet offers exceptional durability and corrosion resistance. Precisely manufactured to exact dimensions, it serves as a reliable raw material for a wide range of demanding industrial fabrication projects.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.230" |
| Length | 38" |
| Width | 23" |
Manufactured under strict quality controls, this brass stock sheet boasts a nominal thickness of 0.230 inches, with precise length and width dimensions of 38 inches and 23 inches, respectively. Composed of a high-copper alloy, it exhibits excellent machinability, formability, and inherent corrosion resistance, making it ideal for applications requiring electrical conductivity, thermal transfer, or decorative finishes. Its robust mechanical properties ensure structural integrity in various manufacturing processes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure material is clean and free of contaminants. 2. Fabricate to required design specifications using appropriate cutting, bending, or joining methods. 3. Apply protective coatings or finishes as per project requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect tooling for cutting or shaping, leading to deformation or surface damage. | Employ high-speed steel or carbide tooling specifically designed for brass processing. Maintain sharp edges and appropriate feed rates. |
| Inadequate surface preparation before finishing or joining, resulting in poor adhesion or weld quality. | Thoroughly degrease and lightly abrade the surface using fine-grit sandpaper or a wire brush to ensure optimal surface chemistry for subsequent treatments. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Electrical connectors and components, Heat exchangers and plumbing fittings, Decorative architectural elements and signage.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||