This brass stock sheet offers superior corrosion resistance and excellent machinability. Its robust 0.226" thickness and generous 46" x 32" dimensions make it ideal for a wide range of fabrication and manufacturing projects requiring durable raw material.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.226" |
| Length | 46" |
| Width | 32" |
Engineered for reliability and performance, this brass stock sheet is manufactured from high-grade brass alloy, providing exceptional tensile strength and malleability. The precise dimensions of 0.226 inches (approximately 5.74 mm) thickness, 46 inches (1168.4 mm) length, and 32 inches (812.8 mm) width ensure consistent material properties for critical applications. Its excellent electrical conductivity and resistance to dezincification make it suitable for demanding environments and complex designs.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and well-lit. 2. Verify material dimensions and quality against project specifications. 3. Cut to desired shape using appropriate cutting tools for brass.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to burrs or material deformation. | Employ carbide-tipped blades or abrasive cut-off wheels specifically designed for brass to ensure clean cuts and prevent damage. |
| Improper handling causing scratches or dents on the surface. | Handle sheets with clean gloves and avoid dragging them across rough surfaces. Store with protective interleaving if necessary. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Electrical connectors and components, Decorative fabrication and signage, Plumbing fittings and hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||