This high-grade brass stock sheet, measuring 0.205 inches thick, 29 inches long, and 14 inches wide, offers exceptional conductivity and corrosion resistance, ideal for robust electrical and lighting system components.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.205" |
| Length | 29" |
| Width | 14" |
Trusted by engineers across multiple sectors, this brass stock sheet is precisely manufactured to a thickness of 0.205 inches, with dimensions of 29 inches in length and 14 inches in width. Composed of a high-copper alloy, it exhibits excellent electrical conductivity, superior corrosion resistance, and good formability, making it suitable for demanding electrical contacts, busbars, terminals, and decorative lighting fixtures where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the brass sheet is clean and free of contaminants before fabrication. 2. Accurately cut the sheet to the required dimensions using appropriate tooling. 3. Fabricate or form the material according to design specifications, ensuring proper support and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to material deformation or burrs. | Employ sharp, designated cutting tools for brass to ensure clean edges and prevent material damage. |
| Inadequate grounding or shielding in electrical assemblies. | Ensure proper grounding and shielding practices are followed during installation to maintain electrical integrity and safety. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Electrical Busbars, Connector Components, Lighting Fixture Bases and Accents.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||