This premium brass stock sheet provides exceptional strength and corrosion resistance for demanding suspending and bracing applications. Its precise dimensions ensure reliable performance in critical installations.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.199" |
| Length | 35" |
| Width | 39" |
Manufactured under strict quality controls, this brass stock sheet boasts a nominal thickness of 0.199 inches, a length of 35 inches, and a width of 39 inches. Composed of high-grade brass alloy, it offers excellent tensile strength, malleability, and inherent resistance to environmental degradation and galvanic corrosion, making it ideal for applications requiring both structural integrity and longevity. Its uniform temper and precise dimensional tolerances facilitate seamless integration into complex assemblies and ensure predictable performance under load.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the sheet for desired cuts and bends. 2. Utilize appropriate cutting tools designed for metal sheeting, ensuring safety precautions are observed. 3. Secure the sheet in its intended position using fasteners or welding methods suitable for brass, following design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper lubrication or blade selection, leading to burring and excessive wear. | Employ high-speed steel or carbide-tipped blades specifically designed for cutting brass or non-ferrous metals, and use a cutting fluid to reduce heat and improve finish. |
| Over-bending the brass sheet, causing work hardening and potential fracturing, especially in thicker sections. | Perform bends according to the material's minimum bend radius specifications, and consider annealing if multiple or tight bends are required to prevent stress and cracking. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Structural bracing components in architectural or industrial settings, Custom mounting plates and supports for heavy equipment, Custom fabricated suspension hardware and linkages.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||