This premium brass stock sheet is engineered for demanding lubricating applications. Its inherent self-lubricating properties and excellent wear resistance ensure optimal performance and extended service life in critical industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.198" |
| Length | 38" |
| Width | 39" |
A high-performance industrial component, this brass stock sheet is precision-manufactured to meet stringent operational demands. With a substantial thickness of 0.198 inches, a generous length of 38 inches, and a width of 39 inches, it provides ample material for fabrication. The specific brass alloy selected offers superior antifriction characteristics, making it ideal for applications requiring reduced wear and friction, such as bushings, bearings, and sliding components. Its machinability and corrosion resistance further enhance its utility in diverse industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the fabrication area is clean and free of debris. 2. Precisely cut the brass stock sheet to the required dimensions for the intended component. 3. Smooth all edges and surfaces to prevent galling or premature wear during operation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a standard brass alloy instead of a specific lubricating grade. | Always specify and procure brass alloys formulated for self-lubricating or reduced-friction properties for these applications. |
| Insufficient edge preparation leading to friction points. | Thoroughly deburr and polish all cut edges and mating surfaces to guarantee smooth operation and prevent premature wear. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings, Wear plates and guides, Bushings for sliding mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||