This high-grade brass stock sheet provides a robust, non-sparking solution for critical safety applications. Its inherent corrosion resistance ensures longevity in challenging industrial settings.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.197" |
| Length | 37" |
| Width | 31" |
Designed for demanding industrial environments, this brass stock sheet offers exceptional durability and non-sparking characteristics. With a precise thickness of 0.197 inches, a generous length of 37 inches, and a width of 31 inches, it meets stringent material requirements for environments where ignition hazards are a concern. The alloy's inherent corrosion resistance to a wide range of chemicals and its excellent machinability make it suitable for fabricating safety guards, explosion-proof enclosures, and grounding components in potentially explosive atmospheres. Compliance with relevant safety standards is assured.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free from contaminants. 2. Accurately cut the brass sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the brass sheet to the intended structure using recommended mechanical fasteners or adhesives, ensuring proper grounding if applicable.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fasteners that can cause galvanic corrosion. | Utilize fasteners made from materials that are compatible with brass, such as stainless steel or brass itself, to prevent corrosion. |
| Inadequate edge finishing, leading to potential safety hazards. | Ensure all cut edges are deburred and smoothed to prevent sharp edges and potential injuries. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Non-sparking tool fabrication, Explosion-proof equipment housings, Safety barriers in hazardous zones.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||