This high-quality brass stock sheet, precision-manufactured for abrading and polishing applications, offers superior durability and a consistent, non-marring surface for optimal finishing results.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.192" |
| Length | 30" |
| Width | 35" |
Specified by design engineers worldwide, this brass stock sheet is engineered to exacting standards for demanding abrading and polishing tasks. Measuring 0.192 inches in thickness, 30 inches in width, and 35 inches in length, it provides a substantial working surface. The inherent properties of brass, including its excellent malleability and corrosion resistance, make it ideal for applications requiring controlled material removal and a fine, polished finish without the risk of ferrous contamination.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of debris. 2. Carefully position the brass stock sheet on a stable, level surface. 3. Secure the sheet using appropriate clamping mechanisms to prevent movement during operation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using abrasive media incompatible with brass. | Consult abrasive media manufacturer compatibility charts or perform test runs to ensure optimal performance and prevent surface damage. |
| Applying excessive pressure during polishing. | Gradually increase pressure only as necessary, maintaining consistent contact for an even finish. Over-application can lead to premature wear or material deformation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Precision finishing of metal components, Deburring and edge radiusing, Surface preparation for plating or coating.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||