This premium brass stock sheet offers superior machinability and corrosion resistance. Its precise dimensions and high-grade brass composition make it an essential component for demanding industrial and fabrication projects.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.189" |
| Length | 30" |
| Width | 16" |
Manufactured under strict quality controls, this brass stock sheet is precisely fabricated to meet demanding engineering tolerances. Measuring 0.189 inches in thickness, 30 inches in length, and 16 inches in width, it offers a substantial surface area for a variety of applications. The material's inherent properties, including excellent electrical and thermal conductivity, good corrosion resistance, and ease of fabrication through machining, stamping, and bending, make it suitable for applications ranging from electrical components and decorative hardware to scientific instruments and prototype development. Each sheet undergoes rigorous inspection to ensure dimensional accuracy and material integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material suitability for the intended application. 2. Accurately measure and mark cut lines on the brass sheet. 3. Utilize appropriate cutting tools and safety precautions to achieve desired dimensions.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools without proper lubrication, leading to tool wear and rough edges. | Employ cutting fluid or oil during all cutting operations to maintain tool sharpness and ensure clean cuts. |
| Applying excessive force during bending, resulting in cracks or deformation. | Perform bending operations with appropriate dies and gradual pressure, or consider annealing the brass for increased ductility if complex bends are required. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Electrical connectors and contacts, Prototyping and model making, Decorative architectural elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||