This high-quality brass stock sheet is engineered for superior lubrication and wear resistance. Its robust composition makes it ideal for critical components requiring reduced friction and extended service life in challenging operational conditions.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.183" |
| Length | 33" |
| Width | 27" |
Designed for demanding industrial environments, this brass stock sheet features a thickness of 0.183 inches, a length of 33 inches, and a width of 27 inches. Manufactured from a specific brass alloy optimized for lubricity, it exhibits excellent machinability and inherent anti-friction properties. Its ductile nature allows for forming into complex shapes, while its non-sparking characteristics are advantageous in hazardous environments. This material is particularly suited for applications where continuous movement and high loads necessitate reliable, low-friction performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean and free of contaminants. 2. Precisely cut or machine the brass stock sheet to the required dimensions and tolerances. 3. Securely fasten the component to the intended substrate, ensuring proper alignment and contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass for high-wear applications. | Utilize this specific lubricating grade brass for enhanced wear resistance and reduced friction. |
| Improper surface preparation of mating parts. | Thoroughly clean and deburr all mating surfaces to prevent premature wear and ensure optimal performance. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Wear plates and liners, Bushings and bearings, Anti-friction components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||