This premium brass stock sheet, engineered to stringent safety standards, provides superior durability and non-sparking characteristics essential for hazardous environments. Its robust composition ensures reliable performance and longevity.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.182" |
| Length | 35" |
| Width | 39" |
Trusted by engineers across multiple sectors, this brass stock sheet boasts a precise thickness of 0.182 inches, a length of 35 inches, and a width of 39 inches. Composed of a high-copper alloy, it exhibits excellent machinability, good corrosion resistance, and inherent non-sparking properties, making it a critical material for applications where electrical conductivity and safety are paramount. Its dense grain structure ensures structural integrity under moderate stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free from debris. 2. Position the brass sheet accurately according to design specifications. 3. Secure the sheet using appropriate mechanical fasteners or adhesives, ensuring even load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass in environments requiring non-sparking properties. | Always select brass alloys specifically rated for non-sparking applications where ignition hazards exist. |
| Inadequate surface preparation before installation. | Thoroughly clean and degrease the installation surface to ensure proper adhesion and prevent premature failure. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Electrical grounding components, Safety barriers in hazardous areas, Non-sparking tooling and equipment housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||