This premium brass stock sheet offers exceptional durability and formability for demanding abrading and polishing tasks. Its precise dimensions ensure consistent performance in industrial and fabrication settings.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.179" |
| Length | 26" |
| Width | 44" |
Precision-manufactured to tight tolerances, this brass stock sheet measures 0.179 inches (approx. 4.55 mm) in thickness, with a substantial surface area of 26 inches (approx. 660.4 mm) by 44 inches (approx. 1117.6 mm). Composed of a high-grade brass alloy, it exhibits excellent machinability, corrosion resistance, and thermal conductivity, making it suitable for applications requiring controlled material removal or surface finishing. The inherent softness of brass allows for effective engagement with abrasive media without excessive wear on tooling.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the surface of the brass sheet thoroughly to remove any debris or oils. 2. Secure the brass sheet firmly to your abrading or polishing fixture. 3. Apply appropriate abrasive media or polishing compounds as per your process requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during initial contact with abrasive media. | Begin with light pressure and gradually increase as needed to avoid uneven abrasion or gouging. |
| Failing to maintain a consistent angle of contact. | Ensure a uniform angle throughout the abrading process to achieve a consistent finish across the entire surface. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom abrasive disc fabrication, Surface preparation for plating or coating, Decorative metal finishing and polishing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||