This lubricating grade brass stock sheet is engineered for demanding industrial applications requiring low friction and excellent wear resistance. Its precise dimensions and material composition ensure reliable performance and extended service life.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.169" |
| Length | 30" |
| Width | 27" |
A high-performance industrial component, this brass stock sheet is manufactured to stringent specifications for lubricating applications. With a nominal thickness of 0.169 inches, a length of 30 inches, and a width of 27 inches, it provides a substantial surface area for fabrication. The inherent properties of brass, particularly its self-lubricating characteristics and excellent machinability, make it an ideal choice for components subjected to continuous motion and friction. Its corrosion resistance further ensures durability in various operational environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the surface thoroughly to remove any contaminants. 2. Cut the brass sheet to the required dimensions using appropriate cutting tools. 3. Fabricate or form the component according to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass for high-friction applications. | Always select lubricating grade brass for components experiencing significant wear and friction. |
| Inadequate surface preparation before fabrication. | Ensure the brass sheet is free of debris and oils to prevent processing issues and ensure proper adhesion or welding. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces, Bushings, Slide mechanisms, Gears.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||