This premium brass stock sheet is engineered for demanding abrading and polishing tasks. Its precise dimensions and material composition ensure consistent performance and superior surface finishing capabilities.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.163" |
| Length | 14" |
| Width | 40" |
A high-performance industrial component, this brass stock sheet is manufactured to exacting standards with a thickness of 0.163 inches, a length of 14 inches, and a width of 40 inches. Composed of high-purity brass, it exhibits excellent machinability, corrosion resistance, and thermal conductivity, making it ideal for applications requiring fine surface preparation and finishing. The material's inherent properties contribute to its effectiveness in reducing abrasive wear and achieving polished surfaces across various industrial substrates.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free from debris. 2. Position the brass stock sheet securely within the abrading or polishing equipment. 3. Verify proper alignment and fastening before initiating operation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using improperly sized sheets, leading to material waste or inadequate coverage. | Always confirm the required dimensions for the specific application and select the appropriate stock sheet size. |
| Applying excessive pressure during polishing, potentially damaging the workpiece or the brass sheet. | Utilize consistent, moderate pressure and allow the material and abrasive to work effectively. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Precision abrasive tooling, Surface finishing and deburring, Component polishing for aesthetic and functional requirements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||