This robust brass stock sheet is engineered for exceptional performance in material handling. Its precise dimensions and inherent brass properties ensure reliable operation in challenging industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.124" |
| Length | 35" |
| Width | 35" |
Built to exacting engineering tolerances, this brass stock sheet offers a nominal thickness of 0.124 inches, with precise length and width dimensions of 35 inches. Composed of a high-grade brass alloy, it exhibits superior corrosion resistance, excellent machinability, and good electrical conductivity, making it ideal for fabricating custom components in material handling systems. Its inherent strength and thermal stability allow for sustained performance under load and varying environmental conditions, ensuring longevity and operational integrity. This sheet meets stringent industry standards for material composition and dimensional accuracy.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of debris. 2. Accurately measure and mark the desired cut lines on the brass sheet. 3. Utilize appropriate cutting tools (e.g., abrasive cutoff wheel, shear) to achieve the required dimensions, ensuring safety protocols are followed. 4. Smooth any sharp edges using a deburring tool or file to prevent injury and ensure proper fitment within the assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for metal without proper safety equipment. | Always use metal-specific cutting blades and wear appropriate personal protective equipment, including safety glasses, gloves, and hearing protection. |
| Failing to properly support the sheet during cutting, leading to inaccurate cuts or damage. | Ensure the brass stock sheet is securely supported on a stable surface during the cutting process to maintain dimensional accuracy and prevent bending. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom material handling equipment fabrication, Component manufacturing for chutes and hoppers, Protective plating and wear surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||