This premium brass stock sheet offers exceptional durability and workability for demanding industrial fabrication. Its precise dimensions and high-quality material ensure reliable performance in critical applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.112" |
| Length | 41" |
| Width | 31" |
A high-performance industrial component, this brass stock sheet boasts a precise thickness of 0.112 inches, a generous length of 41 inches, and a width of 31 inches. Composed of a copper-zinc alloy, it exhibits excellent machinability, good corrosion resistance, and a favorable strength-to-weight ratio, making it suitable for intricate part fabrication and robust structural elements. Its properties are optimized for applications requiring electrical conductivity, thermal transfer, and aesthetic appeal.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting or fabrication area is clean and well-lit. 2. Accurately measure and mark cut lines based on required dimensions. 3. Utilize appropriate cutting tools (e.g., abrasive saw, laser cutter) for precise material removal, maintaining tool sharpness for clean edges. 4. Deburr all cut edges to remove sharp protrusions and prevent material fatigue.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull cutting tools, leading to burrs and uneven edges. | Employ sharp, industrial-grade cutting tools and maintain them regularly for clean cuts and reduced material stress. |
| Improper handling, causing scratches or dents on the surface. | Handle the sheet with care, using gloves and avoiding contact with abrasive surfaces. Store on a flat, protected surface. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Electrical connectors and terminals, Heat exchangers and plumbing components, Decorative and architectural elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||